DIY Evelyn Regency Nightstand Plans

CLICK HERE TO DOWNLOAD THE EVELYN REGENCY NIGHTSTAND PDF PLANS

*This post contains affiliate links. To read my full disclosure policy, click here.

MATERIALS:

• 2 – 2x2x6′
• 1 – Quarter Sheet of 3/4″ Plywood
• 1 – Half Sheet of 1/4″ Plywood
• 1 – 1x6x6′
• 3 – 1x4x8′
• 2 – 1x2x6′
• 3 – Sets of 14″ Drawer Slides
• 3 – Ring Pulls
• 1-1/4″ Wood Screws
• 1-1/4″ Pocket Hole Screws
• 1-1/4″ Brad Nails
• 3/4″ Brad Nails
• Wood Glue
• Iron-On 3/4″ Veneer Edging

TOOLS:

• Circular Saw
• Kreg Rip-Cut
• Kreg Jig
• Hammer or Brad Nailer
• Countersink Drill Bit
• Tape Measure
• Speed Square
• Pencil
• Hearing Protection
• Safety Glasses

CUT LIST:

• 4 – 2×2 @ 25-1/2″ (legs)
• 2 – 3/4″ plywood @ 23″ x 13-3/4″ (side panels)
• 2 – 1×2 @ 13-3/4″ (side top trim)
• 2 – 1×4 @ 13-3/4″ (side bottom trim)
• 6 – 1×2 @ 16-1/4″ (carcass supports)
• 2 – 1×4 @ 16-1/4″ (carcass supports)
• 1 – 3/4″ plywood @ 20-1/4″ x 18″ (top)
• 1 – 1/4″ plywood @ 23″ x 19-1/4″ (back)

DRAWERS (3):

• 6 – 1×4 @ 15″ (drawer front/back)
• 6 – 1×4 @ 13-1/2″ (drawer sides)
• 3 – 1/4″ plywood @ 15″ x 15″ (drawer bottom)
• 3 – 1×6 @ 16″ (drawer face)

DIMENSIONS

STEP 1: BUILD TWO SIDES

STEP 2: ATTACH SIDE TRIM

STEP 3: BUILD CARCASS

STEP 4: BUILD DRAWER BOX

STEP 5: ATTACH DRAWER FACE AND INSTALL RING PULL

STEP 6: INSTALL DRAWER SLIDES

STEP 7: ATTACH TOP

STEP 8: ATTACH BACK PANEL

Even though I’ve double- and triple-checked my plans, I haven’t physically built this myself, so if you build this and come across an error in the plans, I sincerely apologize. Please do let me know, so I can correct the plans.

CLICK HERE TO DOWNLOAD A PRINTABLE PDF OF THE PLANS.

If you build this nightstand, I’d LOVE for you to share photos of it with me!  Thanks so much for stopping by, have a great week!